VU-Flow Model NT150-100P

CAD99.95 each Weight: 1 kg
Width: 22 cm
Length: 36 cm
Height: 17 cm


+

FEATURES:

  • Easily installed on the discharge or suction side of pump - see installation section below.
  • Uses centrifugal force to spin out sediment
  • Sediment collects on the outside of screen, making it easy to clean.
  • Clear polycarbonate housing permits instant visual inspection.
  • Includes purge valve for quick one step flushing of sediment.
  • Polyester screen is easily cleaned with a soft brush if needed.
  • Prolongs the life of water purification filters and equipment.
  • Filter body is molded PVC with slip fit ports (solvent weld to standard 1 1/2” rigid PVC pipe or fittings).
  • Includes 2 bushings for 1 1/4”, 1” or 3/4” female pipe thread - see installation section below.
  • UV stabilized, weather resistant materials used for long service life.
  • Filter cover only requires hand tightening - no tools needed

SPECIFICATIONS:

  • Flow rates from 10 -50 G.P.M.
  • Maximum operating pressure 150 P.S.I. at 73 degrees F (23 degrees C)
  • Maximum water temperature 100 degrees F (38 degrees C) at 40 P.S.I.
  • Includes 100 mesh screen with other sizes available.

INSTALLATION:

  • The VU-FLOW filter should be installed between the pump and pressure tank so that system pressure will back wash the screen when the purge valve is opened.
  • It can be installed between a jet pump and the foot valve - BUT: THE FILTER MUST KEPT CLEAN SO THAT WATER FLOW TO THE PUMP IS NEVER BLOCKED, THIS CAN BURN OUT THE PUMP!
  • The inlet and outlet ports are 1 1/2” slip fit (PVC solvent weld) to accept standard rigid PVC pipe.
  • Bushings with 1 1/4”, 1” or 3/4” female pipe thread can be glued in -

PLEASE INDICATE YOUR SIZE PREFERENCE IN THE CUSTOMER NOTES WINDOW AT THE BOTTOM OF THE ORDER FORM